| |
| |
AF4015 Aluminum foil tape
| |
PRODUCT DESCRIPTION：
A 40 micron (1.6 mil) high tensile strength aluminum foil backing, combined with a high performance acrlic emulsion adhesive, protected by an easy-release silicone release paper.
FEAUTURES：
Aluminum backing provides excellent reflection of both heat and light.
High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application,
Low moisture vapor transmission rate makes Hiseatape AF4015 an excellent vapor barrier.
Service Temperature range from -20° to +120°C (.-4 ~ +248°F)
TYPICAL PHYSICAL PROPERTIES:
|
 |
TYPICAL APPLICATIONS：
HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
PRODUCT FORM & SIZE AVAILABLE:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").
Log Roll: 1200mm x 45 / 50m
Jumbo Roll: 1200mm x 1350m
STORAGE & SHELF LIFE： One year when stored at 21℃(70  ) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the Hiseatape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on Hiseatape product between +10 ~ +40°C (+50 ~ +105 ).
LIMITED WARRANTY & LIMITED REMEDY:Your exclusive remedy & Hiseatape obligation shall be, at Hiseatape’s option, to replace or repair the Hiseatape product or refund the purchase price of the Hiseatape product.
|
|
